We send you the transfer, all you need is a heat press and a shirt! We also provide step by step instructions so you can create your own shirts with ease.
(DIY) 3 Glasses
Spangle application instructions
** YOU MUST USE A HEAT PRESS**
285F-300F for 12 seconds with high pressure but still able to lock down. (if your machine measures 0-9 it should be set at 7)
Pre press garment to flatten out any wrinkles for 4 seconds then allow to cool.
Use a lint roller to remove any threads or lint
Place spangle design on the garment
Cover with Teflon sheet
Close heat press for 12 seconds. Once finished, remove garment lay flat on work table.
Rub the design to assist in cooling using any cloth
Peel transfer WARM (NOT HOT OR COLD) gently from one side.
If any spangles come off during peel, you can cut out the transfer paper that holds the spangles and replace it where it belongs. Your cut out does not have to be too precise as to hold just the one little spangle. Re heat the hole design for just 5-6 seconds. Be careful not to move any of the other spangles since they will be vulnerable to movement. Allow the spangles to cool and peel off the transfer cut out.
Washing/drying instructions
As with most decorated garments care should be taken when laundering
Turn the garment inside out if possible
Do not launder with rough items within the same washer.
Use gentle cycle. Water temperature should be cold or warm but NOT HOT
Drying is your choice: hang to dry, or use low heat settings.
